Shrink molded parts with adhesive for many different connectors - from stock and at attractive prices! MIL-KABEL-SYSTEMS is the specialist for heat shrinkable molded parts with adhesive for sealing between connector and cable. We have many variants of the heat shrinkable molded parts with adhesive from Raychem/Tyco in stock or can quickly procure these adhesive-coated molded parts. Of course, we are also the fast supplier for all heat shrinkable parts without adhesive coating. For more than 22 years, many straight and angled Raychem molded parts in various shapes and designs have been used in the production of our own cable assemblies. Mostly these are adhesive coated molded shrink parts, but often also shrink molded parts without adhesive coating. From the good experience, we always prefer the TE Connectivity, Raychem, Tyco and HellermannTyton shrink molded parts.
What are the shrink molded parts with adhesive for connectors?
From Raychem and HellermannTyton there are straight and right angle fittings with lips, straight and right angle fittings without lips, straight and right angle fittings with long cable outlet, straight and right angle fittings with straight thin cable inlet, Uni-boot fittings, straight and right angle fittings for D-Sub plugs/hoods, T fittings, Y fittings, end caps and cable end caps. MIL-KABEL-SYSTEMS can supply many of these variations quickly and at attractive special prices!
What are the most common shrink molded parts with adhesive for connectors?
For professional shrinking and sealing of connectors and cables, Raychem/Tyco molded parts with adhesive 202K121/25-225-0, 222K121/25-225-0, 222K132/25-225-0, 202K132/25-225-0, 202K/142/25-225-0, 222K142/25-225-0, 202K153/25-225-0, 222k153/25-225-0, 202K163/25-225-0, 222K163/25-225-0, 202K174/25-225-0, 222K174/25-225-0, 202K185/25-225-0 and 222K185/25-225-0 are preferred. Raychem molded shrink parts without adhesive have part numbers 202K121/25-0, 222K121/25-0, 222K132/25-0, 202K132/25-0, 202K/142/25-0, 222K142/25-0, 202K153/25-0, 222k153/25-0, 202K163/25-0, 222K163/25-0, 202K174/25-0, 222K174/25-0, 202K185/25-0 and 222K185/25-0.
Which shrink molded parts with adhesive for connectors does MIL-KABEL-SYSTEMS supply?
Many molded parts from Tyco, TE Connectivity, Raychem and HellermannTyton are available from MIL-KABEL-SYSTEMS at short notice and at lucrative prices. We are also happy to offer you assembled cables with heat-shrinkable molded parts.
Which shrink fit part do I need for my connector and cable?
The correct molded shrink part for connectors depends on the outer diameter of the cable, the outer diameter of the molded adapter on the connector and the desired shrink length. Here we give you the dimensions of the most commonly used molded shrink parts for connectors. These mold shrink parts are from TE Connectivity, Raychem, Tyco, the market leader in shrink technology.
What are the dimensions of the shrink molded parts for connectors?
Raychem fittings 202K121/25-0, 202K/121-25-225-0, 222K121/25-0, 222K/121-25-225-0
Unshrunk condition Outer diameter at connector: 24mm Outer diameter at cable: 24mm
Shrunk state Outer diameter at connector: 10.4mm Outer diameter at cable: 5.6mm
Raychem mold shrink parts 202K132/25-0, 202K/132-25-225-0, 222K132/25-0, 222K/132-25-225-0
Unshrunk condition Outer diameter at connector: 30mm Outer diameter at cable: 30mm
Shrunk state Outer diameter at connector: 14.2mm Outer diameter at cable: 5.9mm
Raychem Shrink Molded Parts 202K142/25-0, 202K/142-25-225-0, 222K142/25-0, 222K/142-25-225-0
Unshrunk condition Outer diameter at connector: 31mm Outer diameter at cable: 31mm
Shrunk state Outer diameter at connector: 18.00mm Outer diameter at cable: 7.1mm
Raychem shrink parts 202K153/25-0, 202K/153-25-225-0, 222K153/25-0, 222K/153-25-225-0
Shrunk condition Outer diameter at connector: 36mm Outer diameter at cable: 36mm
Shrunk state Outer diameter at connector: 22.4mm Outer diameter at cable: 8.4mm
Raychem heat shrink parts 202K163/25-0, 202K/163-25-225-0, 222K163/25-0, 222K/163-25-225-0
Shrunk condition Outer diameter at connector: 43mm Outer diameter at cable: 43mm
Shrunk state Outer diameter at connector: 28.2mm Outer diameter at cable: 9.9mm
Raychem heat shrinkable fittings 202K174/25-0, 202K/174-25-225-0, 222K174/25-0, 222K/174-25-225-0
Unshrunk condition Outer diameter at connector: 60mm Outer diameter at cable: 60mm
Shrunk state Outer diameter at connector: 35.1mm Outer diameter at cable: 15.7mm
Raychem shrink parts for connectors 202K185/25-0, 202K/185-25-225-0, 222K185/25-0, 222K/185-25-225-0
Shrunk condition Outer diameter at connector: 66mm Outer diameter at cable: 66mm
Shrunk state Outer diameter at connector: 44.5mm Outer diameter at cable: 16.8mm
What materials are adhesive-coated shrink molded parts made of?
All these heat shrink parts for connectors are available in Liquid Resistant Modified Elastomer, Low Halogen Material, Modified Flurelastomer, Semi Rigid Modified Polyolefin.
For which temperature ranges are heat-shrinkable molded parts suitable?
These shrink parts for connectors are suitable for temperatures from -75 degrees to +200 degrees.
What is the shrink temperature for molded parts?
All these heat shrink parts for connectors are suitable for shrink temperatures from 100 degrees.
What is used to shrink the molded parts for plugs?
The molded shrink parts for connectors are shrunk with a hot blower. For this purpose, we offer a selection of different hot blowers from Raychem, Tyco, TE Connectivity and HellermannTyton.
What specifications do the mold shrink parts from Tyco, Raychem, TE Connectivity meet?
Tyco, Raychem, TE Connectivity adhesive shrink molded parts meet MIL, VG, PAN and UL specifications.
Where are shrink molded parts with adhesive used for connectors?
These heat-shrinkable molded parts with adhesive provide an optimal seal between the connector and the cable. They are used in railroads, streetcars, subways, ships, helicopters, vehicles, airplanes, rockets, drones, spacecraft, robots, prime movers, race cars, nuclear power plants, medical equipment and much more.
Who is the expert in shrink molded parts and special shrink technology for connectors?
MIL-KABEL-SYSTEMS is the expert for heat shrinkable molded parts and for shrink technology in cable assembly. We professionally shrink all molded shrink parts onto a wide variety of connectors and cables during cable assembly. All molded parts, whether molded parts with adhesive, molded parts without adhesive, straight and angled shrink parts.
Why not test our stock of shrink mold parts and our experience in shrinking electronic components!
